40
Getting Started
Assigning an IP Address
Assigning an IP Address
Before you can begin working with 10/100 Internal PS, you must get or assign an IP address for the 10/100 Internal PS device.
There are three different ways to assign an IP address. Here is a list and a brief description of each method:
•Web View —
•DHCP — See your LAN administrator for more information.
•Telnet — DOS command to assign an IP address.
Important • Throughout the procedures in this chapter, there are some features that require the default User ID and/or default password. If you are prompted, these are the defaults:
•User ID: admin
•Password: 1234
With Dynamic Host Configuration Protocol (DHCP)
If your network uses DHCP, your 10/100 Internal PS device is assigned a temporary IP address.
Note • Check with your Network Administrator to see whether your network uses DHCP.
Without DHCP
If your network does not use a dynamic IP addressing system (such as DHCP), you need to set a permanent IP address for the 10/100 Internal PS device.
Y885775 | BradyConnect 10/100 Internal Print Server User Guide | 07/18/2008 |
