Operation Notes and Details

attendant must view the plat- form as it lowers to be certain the entire platform reaches and

Fully-Vertical

Outboard Barrier

3"

Note: Platform must raise approximately three inches before barrier raises fully.

rests safely on the ground. Stop pressing the DOWN switch if any portion of the platform is obstructed while descending or the entire platform does not reach ground level for any rea- son (contact with an obstruction, mechanical failure, exceeding WKHOLIW´ÁRRUWRJURXQGµFDSDFLW\ etc.).

Note: The barrier must be fully unfolded until the entire wheel- chair (or standee) has crossed when loading or unloading at ground level. Discontinue lift operation immediately if the outer barrier does not operate properly.

Bridging: The NVL incorpo- rates a bridging feature. This feature stops the down travel

of the platform if the outboard end of the platform contacts a raised surface (such as a curb), preventing the operator from lowering the inboard end of the platform.

Handrails: Dual handrails are provided for wheelchair pas- senger (or standee) use. The handrails unfold automatically to the deployed (horizontal) position when the lift unfolds and automatically fold to the stowed (vertical) position when the platform folds.

If able, passengers should grip both handrails when on the lift platform. Discontinue lift operation immediately if the handrails do not operate properly.

Page 21

Page 23
Image 23
Braun NVL SERIES manual Fully-Vertical