Braun NVL SERIES specs

continued

Perform all procedures listed in previous section also

Cycles

Rotating pivot slide arm pivot pins (2)

Parallel arm pivot bearings (16)

Handrail pivot pin bearings (4)

Hydraulic cylinder bushings (8)

Inspect Lift-Tite™latch rollers for wear or damage, positive securement and proper operation (2)

Inspect outer barrier feet for proper operation, positive securement and detached or missing tor- sion spring

Inspect inner roll stop for:

•Wear or damage

•Proper operation. Roll stop should just rest on top surface of the threshold (base) plate.

•Positive securement (both ends)

Apply Light Oil - See Lubrication Diagram

Correct, replace damaged parts and/or relubri- cate.

Resecure, replace or correct as needed. See Platform Angle Instructions and Floor Level Adjustment Instructions.

Inspect handrail components for wear or damage,	Replace damaged parts.
and for proper operation

Page 46