Maintenance and Lubrication Schedule
| Inspect platform fold gear rack and gear weldment | Remove foreign objects, replace damaged parts |
| teeth for foreign objects, wear or damage (bent, | and resecure as needed |
| deformed or misaligned), positive securement and |
|
750 | proper operation |
|
|
| |
Cycles | Inspect lift for wear, damage or any abnormal | Correct as needed. |
| ||
| condition |
|
| Inspect lift for rattles | Correct as needed. |
|
|
|
1500
Cycles
continued
Perform all procedures listed in previous sections also
Outer barrier pivot arm pivot points (2) | Apply Light Oil - See Lubrication Diagram |
Upper and lower fold arm telescoping area | Apply Light Grease - See Lubrication Diagram |
Platform pivot pin bearings (2) | Apply Light Oil - See Lubrication Diagram |
Platform fold axles (2) | Apply Light Oil - See Lubrication Diagram |
Inner roll stop lever bearings (2) | Apply Light Oil - See Lubrication Diagram |
Inner roll stop lever slot (2) | Apply Light Oil - See Lubrication Diagram |
Page 45
