Manual Operating Instructions
Remove pump cover to access hand pump and pump handle as outlined on page 33. Refer to release valve photos and illustra- tion on page 34.
Open |
| Close |
(Down) |
| (Up/Stop) |
|
|
|
B
To Unfold Platform (Out):
Using hand pump handle (Photo B):
1.Close hand pump valve (place slotted end of pump handle onto backup pump release valve and turn clockwise).
2.Insert handle in pump and stroke until platform folds fully (stops).
3.Open hand pump valve (turn counterclockwise) until platform
UHDFKHVÁRRUOHYHOOpen 1/2 turn only.
4.Close hand pump valve (turn clockwise).
Note: Valve must be tight, but do not overtighten.
Down (To Lower):
Place slotted end of pump handle onto backup pump release valve and turn counterclockwise (open 1/2 turn only) until the platform reaches ground level and roll stop unfolds.
Stroking
Hand
Pump
C
Page 35
