Braun NVL SERIES manual Lift Components

Lift Components

Refer to the Lift Terminology Il- lustration on page 4.

Pump Module: The lift-mounted pump module consists of the hydraulic pump, the manual hand pump, the electronic control board and electrical components that power the lift electric/hydrau- lic systems.

Hand-held Pendant Control: The hand-held attendant's pendant control is connected to the pump module. The hand- held pendant is equipped with two rocker switches, (UNFOLD, FOLD, DOWN, and UP). The momentary switches activate the automatic lift functions.

Lift Terminology

Lift Frame: The lift frame con- sists of the base plate, threshold warning plate, towers, parallel arms, vertical arms, platform pivot arms and handrails. Two main hydraulic cylinders are housed in the parallel arms. The electrical/hydraulic powered lift frame components mechani- cally unfold, lower, raise and fold the lift platform assembly.

Platform Assembly: The lift “stacking” platform assembly is made up of an inboard platform section and an outboard plat- form sections (each section con- sisting of a steel tubing frame with grating surface). The inner roll stop/bridge plate assembly (IB) is mounted on the inboard platform section. The outboard

platform section is equipped with the outer barrier.

Lift-Tite™Latches: The spring- loaded latches prevent the platform from unfolding from the stowed position in the event of platform drift. Further details regarding Lift-Tite™latches are provided on pages 16 and 17.

Outer Barrier: The spring-loaded automatic outer barrier (outboard roll stop) provides a ramp for wheelchair loading and unloading at ground level. Photos and

Page 6