Maintenance and Lubrication

All listed inspection, lubrication and maintenance procedures should be repeated at “750 cycle” intervals following the scheduled “4500 Cycles” maintenance. These intervals are a general guideline for scheduling maintenance procedures and will vary according to lift use and conditions. Lifts exposed to severe conditions (weather, environment, contamination, heavy usage, etc.) may require inspection and maintenance proce-

GXUHVWREHSHUIRUPHGPRUHRIWHQWKDQVSHFLÀHG

Maintenance Indicator: The Lift Ready green LED mounted on top of the pump cover will begin to blink after every 750 cycles. The blinking LED will not affect the functions of the lift, but is a

reminder to complete necessary maintenance and lubrication. Once the lift has been serviced, fully stow the lift. Once stowed, press the UP button on the hand pendant and the Floor Level Set but- ton on the back side of the pump cover until the Lift Ready green LED stops blinking.

Discontinue lift use immediately if maintenance and lubrication procedures are not properly per- formed, or if there is any sign of wear, damage or improper operation. Contact your sales represen- tative or call The Braun Corporation at 1-800-THE LIFT®. One of our national Product Support repre- sentatives will direct you to an authorized service technician who will inspect your lift.

See the Maintenance/Lubrication Schedule for recommended applications per number of cycles.

 

 

6SHFLÀHG UHFRPPHQGHG 

$YDLODEOH

%UDXQ

Lubricant

Type

Lubricant

Amount

Part No.

LO - Light Oil

Light Penetrating Oil

LPS2, General Purpose

11 oz.

15807

(30 weight or equivalent)

Penetrating Oil

Aerosol Can

 

 

 

 

 

 

 

 

DE - Door-Ease

Stainless Stick

Door-Ease

1.68 oz.

15806

Style (tube)

Stick (tube)

 

 

 

 

 

 

 

 

 

 

LG - Light Grease

Light Grease

Lubriplate

14 oz.

15805

(Multipurpose)

 

Can

 

 

 

 

 

 

 

 

 

Page 42

Page 44
Image 44
Braun NVL SERIES manual DE Door-Ease