Braun RA500 Daily Preventive Maintenance Schedule, Pre-Trip Inspection, Post-Trip Inspection

DAILY PREVENTIVE MAINTENANCE SCHEDULE

Vehicle Number:	Date:
Inspector:

Pre-Trip Inspection:

Before each scheduled day of lift service, operate ramp minimum one complete cycle and inspect each of the following :

✓ Do the vehicle interlock(s) function as intended?

Does the ramp deploy when the ramp interlock is activated as intended?

Does the control switch(es) function properly?

Does the ramp cargo door light (if equipped) function as intended?

Do the lift cargo door securement devices function as intended (if equipped)? Does the ramp safely clear the cargo door as the ramp is deployed and stowed?

Does the ramp operate smoothly (no jerking or abnormal movement)?

Does the ramp operate at normal speed? Is the power source adequate?

Is ramp operation quiet (no rattles, abnormal sounds, etc.)? Is the ramp antiskid in place, worn or damaged?

Can you visually detect any ramp wear, damage, misalignment, loose bolts, broken welds or any abnormal conditions?

Post-Trip Inspection:

Operate ramp minimum one complete cycle and check each of the above daily pre-trip inspec- tions if applicable for your daily inspection routine (outlined by your transit agency).

Clean ramp surfaces where wheelchairs travel

Clean and lubricate key locations based on ramp usage frequency and climate conditions (outlined by your transit agency). Lubrication procedures should be performed by a Braun authorized service representative as detailed in this manual.

Page 424