RAMP OPERATION
Ramp Manual Operation (continued)
To Reengage Carriage Assembly to Drive Chain:
1. | Position the ramp platform | 4. | Grasp the platform Hand Hold | 6. | Verify mechanism is reen- |
| manually so that only 15 cm |
| and move the platform slightly |
| gaged (locked). Pull on the |
| is extended out of the cas- |
| outward until platform locks |
| Hand Hold to ensure no |
2. | sette. |
| into position (secured by re- | 7. | movement occurs. |
Turn (loosen) the manual |
| engaging the carriage assem- | Stow the remaining portion | ||
3. | release “T” handle 90°. | 5. | bly with the drive chain). |
| of the platform by using the |
Push the “T” handle fully | Turn (tighten) the “T” handle |
| electrical system. | ||
| inward until handle contacts |
| 90° to secure handle in the |
|
|
| shaft shoulder (3" to 4"). |
| engaged (locked) position. |
|
|
Figure D 
TURN | TURN |
|
| TURN | |
|
| |
TO | TO |
|
LOCK | TO | |
LOCK |
| |
|
| LOCK |
Step 2 | Step 3 | Step 5 |
Figure E
Hand Hold
Page 13
