Important safeguards, Breville recommends safety first

Breville recommends safety first

We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition, we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions:

Important safeguards

Read all instructions BEFORE USE AND SAVE FOR FUTURE REFERENCE

To reduce the risk of severe injury to persons, ensure that important safeguards listed below are followed

•Remove any packaging material and promotional stickers before using the Breville Hemisphere™ Control Blender for the first time.

•To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this appliance.

•Do not place the Breville Hemisphere™ Control Blender near the edge of a counter-top or table during operation. Ensure that the surface is level, clean and free of water, flour, etc. Vibration during operation may cause the appliance to move.

•Do not place the Breville Hemisphere™ Control Blender on or near a hot gas or electric burner, or where it could touch a heated oven.

•Always ensure the Breville Hemisphere™ Control Blender is properly assembled before use. Refer to assembly and operation instructions.

•Use only the blender jug and lid supplied with the Breville Hemisphere™ Control Blender.

•Always ensure the blender lid is firmly positioned on the blender jug before operating.

•Always ensure the Breville Hemisphere™ Control Blender is turned off by pressing

the button on the control panel. Then unplug the cord. Make sure the motor and blades have completely stopped before attempting to move the appliance, or when the Breville

Hemisphere™ Control Blender is not in use and before disassembling, cleaning and storing.

•None of the recipes in this instruction book are considered a heavy load.

•Do not leave the Breville Hemisphere™ Control Blender unattended when in use.

•If food becomes lodged around the blending blade, turn the Breville Hemisphere™ Control Blender off by

pressing the button on the control panel. Then unplug the cord. Make sure the motor and blades have completely stopped before removing the jug from the motor base. Use a spatula to dislodge or stir the food before continuing. Do not use fingers as the blades are sharp.