Breville BRC520 manual Operating Your Breville Risotto & Rice

Operating Your Breville Risotto & Rice™

Fig. 2

4.Add the washed rice to the removable cooking bowl, ensuring rice is spread evenly across the bottom of the bowl and not heaped to one side (Fig 3).

Fig. 3

5.Add water using the following ratios: White Rice = 1 cup water : 1 cup rice Brown Rice = 1½ cups water : 1 cup rice

6.Place the glass lid into position.

7.Plug power cord into a 230V or 240V power outlet and then switch the power on at power outlet. The WARM light will illuminate.

8.Press the MENU SELECTOR button to the RICE setting. The red light will flash for a few seconds, then the light will permanently illuminate and cooking will commence.

9.When cooking is complete, the Ready beeps will sound and the Risotto & Rice™ will automatically switch to the WARM setting. The orange WARM light will illuminate.

10.Open the lid and turn the rice over with the serving spoon provided. Replace the lid and allow the rice to stand for 10-15 minutes before serving. This allows any excess moisture to be absorbed, resulting in a fluffier rice texture.

NOTE

After using the RICE setting the appliance will automatically switch to the WARM setting for up to 5 hours.

NOTE

Do not remove the glass lid until ready to serve (except for when turning over rice after cooking is complete or as suggested in the recipes).

NOTE

To stop the WARM setting, switch off at the power outlet and then unplug the power cord.

IMPORTANT

•Always place liquid into the removable cooking bowl before pressing the MENU SELECTOR button to the RICE setting.

•Do not interfere with the automatic selector control during operation.

•To prevent scratching the non-stick surface of the removable cooking bowl, always use wooden or plastic utensils.

11