PAgeTroubleshootingheader.....
Possible problem | Easy solution |
|
|
Machine will not work | • The safety locking arm may not be correctly engaged |
when turned ON | in the vertical operating position with the locking arm |
| located into the two grooves on either side of the juicer |
| cover. |
|
|
Motor appears to stall | • Wet pulp can build up under the juicer cover if the juicing |
when juicing | action is too vigorous. Try slower juicing action by pushing |
| the food pusher down slower. Follow Disassembling and |
| Cleaning instructions and clean the filter bowl surround, |
| the stainless steel filter basket and the juicer cover. |
| • Hard fruit and vegetables will put excess strain onto the |
| motor if a low speed is selected. Please refer to the juicing |
| guide to determine the correct speed for the fruit and |
| vegetables selected for juicing. |
|
|
Excess pulp building | • Stop the juicing process and follow Disassembling |
up in the stainless | instructions. Remove the juicer cover, scrape off pulp, |
steel filter basket | reassemble and begin juicing again. Try alternating (soft |
| and hard) vegetables and fruit varieties. |
|
|
Pulp too wet and | • Try a slower juicing action. Remove the stainless steel filter |
reduced extracted | basket and thoroughly clean mesh walls with a cleaning |
juice | brush. Rinse the filter basket under hot water. If the fine |
| mesh holes are blocked, soak the basket in a solution of hot |
| water with 10% lemon juice to unblock the holes or wash |
| in the dishwasher. This will remove excess fiber build up |
| (from fruit and vegetables) which could be inhibiting the |
| flow. |
|
|
Juice leaks between | • Try a slower juicing speed and push the food pusher down |
the rim of the juicer | the feed chute slower. |
and the juicer cover |
|
|
|
Juice sprays out | • The juice is being extracted too fast. Try a slower juicing |
from spout | speed and push the food pusher down the feed chute |
| slower. |
|
|
22
