Brocade Communications Systems 53-1001761-01 manual Disabling 802.1x on specific interface ports

10 Interface-specific administrative tasks for 802.1x

Disabling 802.1x on specific interface ports

To disable 802.1x authentication on a specific interface port, perform the following steps from Privileged EXEC mode.

1.Enter the configure terminal command to access global configuration mode.

2.Use the interface command to select the interface port to modify.

switch(config)#interface tengigabitethernet 1/12

3. Use the no dot1x port-controlcommand to disable 802.1x Authentication.

switch(conf-if-te-1/12)#no dot1x authentication

4. Enter the copy command to save the running-configfile to the startup-configfile.

switch(conf-if-te-1/12)#exitswitch(config)#end

switch#copy running-config startup-config

114	Converged Enhanced Ethernet Administrator’s Guide
	53-1001761-01