Brocade Communications Systems 53-1001761-01 manual

13 Creating and managing the FCoE login group configuration

Perform the following task to create an FCoE login group.

Task		Command

Syntax is as follows:		switch:admin> fcoelogingroup --create lgname -switch
•	--create—Create a login group.	swwn -self[-allowall “member; member;…”]
•	lgname—Specify the name of the login group
	for this switch. The maximum length is a
•	64-byte string.
•	-switchswwn—Specify the WWN of the
	switch for which the login group is being
•	created.
•	-self—Specify the WWN of the current switch.
•	-allowall—Allow all VN_port devices to log in
•	to the switch.
•	member—Identify the WWN of the VN_port.

The WWN must be specified in hex as xx.xx.xx.xx.xx.xx.xx.xx. Only specified members are allowed to log into the switch.

Modifying the FCoE login group device list

Perform the following tasks to add or remove VN_port devices from the FCoE login group.

Task		Command

Add VN_port devices to the FCoE login group.		switch:admin> fcoelogingroup --add lgname member;
Syntax is as follows:		member;…
• lgname—Specify the name of the login group
	to which VN_port devices are to be added.
• member—Identify the WWN of the VN_port.
	The WWN must be specified in hex as
	xx.xx.xx.xx.xx.xx.xx.xx. Only specified
	members are allowed to log into the switch.

Remove VN_port devices from the FCoE login		switch:admin> fcoelogingroup --remove lgname
group. Syntax is as follows:		member; member;…
• lgname—Specify the name of the login group
	from which VN_port devices are to be
•	removed.
•	member—Identify the WWN of the VN_port.

The WWN must be specified in hex as xx.xx.xx.xx.xx.xx.xx.x. Only specified members are allowed to log into the switch.

Task	Command

Delete an FCoE login group. Syntax is as follows:	switch:admin> fcoelogingroup --delete lgname
• lgname—Specify the name of the login
group.

128	Converged Enhanced Ethernet Administrator’s Guide
	53-1001761-01