Brocade Communications Systems 53-1001761-01 manual Flash file management commands

14 Flash file management commands

switch#copy flash://config_filename startup-config

CEE configuration management commands

Table 23 lists the common CEE configuration management commands.

TABLE 23	CEE configuration management commands
Task		Command
Write the current running configuration file to		switch#copy running-config startup-config
the startup configuration file.		Overwrite the startup config file (y/n): y
NOTE: If you enter y at the prompt, the
running configuration file overwrites
the startup configuration file. If you
enter n at the prompt, the startup
configuration file is not overwritten.
Copy the startup configuration file to the		switch#copy startup-config running-config
running configuration file.
Erase the startup configuration file.		switch#write erase
NOTE: This command does not affect the
running configuration file.
Copy the running configuration file to the		switch#copy running-config
archive folder on an FTP server.		ftp://jsmith:password@/archive/config_file]
Copy a stored startup configuration file in		switch#copy flash://test_filename
Flash to the running configuration.		running-config
Copy a configuration file from an FTP server to		switch#copy
the startup configuration.		ftp://jsmith:password@/archive/test_filename
		startup-config}
Display the contents of the running		switch#show running-config
configuration file.

Flash file management commands

Table 24 describes the common tasks used to manage the Flash files on the Brocade 8000 switch. The Converged Enhanced Ethernet Command Reference contains complete information on all available CLI commands.

NOTE

Use of the flash:// prefix is optional.

TABLE 24 CEE Flash memory file management commands

Task	Command
List the files in the Flash memory directory.	switch#dir
Delete a file from the Flash memory directory.	switch#delete flash://example_filename

134	Converged Enhanced Ethernet Administrator’s Guide
	53-1001761-01