Brocade Communications Systems 53-1001761-01 guide

Creating and managing the FCoE login group configuration

13

Displaying the FCoE login configuration

Perform the following tasks to display the FCoE login configuration.

Task		Command

Display the FCoE login configuration. Syntax is as		switch:admin> fcoelogincfg --show [-switch swwn
follows:		-logingroup lgname] [-saved]
• -switchswwn—Displays all of the login
•	groups for the specified switch.
	-logingrouplgname—Displays the login group
•	configuration for the specified login group.
	-saved—Displays only the effective
	configuration.

Display the status of the last configuration merge		switch:admin> fcoelogincfg --show [-mergestatus]
during the last fabric merge. This operand also

displays conflicting login groups and login groups for non-existing switches.

Saving the current FCoE configuration

Perform the following task to save the current FCoE configuration.

Task	Command

Save the current FCoE login configuration as the	switch:admin> fcoelogincfg --save
effective configuration fabric-wide.

Creating and managing the FCoE login group configuration

Another important task in administrating FCoE is configuring the FCoE login information.

Creating an FCoE login group

The FCoE login group enables you to configure login policies.

Converged Enhanced Ethernet Administrator’s Guide	127
53-1001761-01

Image 149

Brocade Communications Systems 53-1001761-01 manual Creating and managing the FCoE login group configuration

Contents

Converged Enhanced Ethernet Brocade Communications Systems, Incorporated Contents This chapter Vlan overview Chapter Using the CEE CLI Chapter Configuring Link Aggregation using the CEE CLI This chapter QoS overview Chapter Configuring Lldp using the CEE CLI 802.1x protocol overview This chapterAbout Igmp Active Igmp snooping CEE configuration management guidelines and restrictions Chapter FCoE configuration using the Fabric OS CLI Index WRR schedule two queues Strict priority and Weighted Round Robin schedulerPage Tables Page How this document is organized About This DocumentThis chapter Supported hardware and software What’s new in this document Command syntax conventionsDocument conventions Text formatting Optional element Key termsEnclosed in angled brackets Repeat the previous element, for example membermember Getting technical help Additional informationBrocade resources Other industry resources FT00X0054E9 Serial number label is located as follows Document feedback Xxi Page FCoE overview Introducing FCoEFCoE terminology FCoE hardware Layer 2 Ethernet overview Layer 2 Ethernet overviewLayer 2 forwarding Vlan tagging Frame classification incoming Loop-free network environment Congestion control and queuing Access control Trunking FCoE Initialization ProtocolFlow Control FIP discoveryPage FCoE logout FCoE loginFIP logout FC zoning LogincfgName server FCoE queuing Management Tools Using the CEE CLICEE Command Line Interface Saving configuration changes with the copy command Saving your configuration changesSaving configuration changes with the write command CEE CLI Rbac permissions Accessing the CEE CLI from the Fabric OS shell Accessing the CEE CLI through the console or TelnetCEE CLI command modes CEE Command Line Interface Interface port-channel Lists CEE CLI keyboard shortcuts CEE Command Line Interface CEE CLI command modesCEE CLI keyboard shortcuts Displaying CEE CLI commands and command syntax Using the do command as a shortcut CEE CLI command output modifiers CEE CLI command completion CEE Command Line Interface SAN Integration Standard CEE Integrations and ConfigurationsOverview of standard CEE integrations CEE and LAN integration Integrating a Brocade 8000 switch on a SAN CEE and LAN integration About CEE map attributes Creating the CEE map Configuring Dcbx Activate the protocol Configuring Spanning Tree ProtocolConfiguring Vlan Membership Example of creating Vlan rules and classifier groups Configuring the CEE Interfaces Example of setting the map name to srvgroup Minimum CEE configuration to allow FCoE traffic flow Server connections to the Brocade 8000 switchFibre Channel configuration for the CNA Ethernet configuration for the CNA Switchconfig#interface tengigabitethernet 0/0 Ingress Vlan filtering Configuring VLANs Using the CEE CLIVlan overview Displays the frame processing logic for an incoming frame Default Vlan configuration Vlan configuration guidelines and restrictions Configuring the MTU on an interface port Vlan configuration and managementVlan configuration and management To disable the CEE interface Disabling STP on a Vlan Creating a Vlan interfaceEnabling STP on a Vlan Configuring an interface port as an access interface Configuring a Vlan interface to forward FCoE trafficConfiguring an interface port as a Layer 2 switch port Disabling a Vlan on a trunk interface Configuring an interface port as a trunk interfaceEnter the no shutdown command to enable the CEE interface Disabling a Vlan on a converged interface Configuring protocol-based Vlan classifier rulesConfiguring an interface port as a converged interface Deleting a Vlan classifier rule Configuring a Vlan classifier ruleConfiguring MAC address-based Vlan classifier rules Activating a Vlan classifier group with an interface port Creating a Vlan classifier group and adding rulesClearing Vlan counter statistics Displaying Vlan information Configuring the MAC address table Configuring the MAC address tableSpecifying or disabling the aging time for MAC addresses Adding static addresses to the MAC address table Configuring the MAC address table STP overview Configuring STP, RSTP, and Mstp using the CEE CLI Configuring STP on Brocade FCoE hardware Is the interface learning MAC addresses? Rstp overview Configuring Rstp on Brocade FCoE hardware For details, see Specifying the port priority on Mstp overview Configuring Mstp on Brocade FCoE hardware Switchconf-mstp#instance 1 priority Default STP, RSTP, and Mstp configuration STP, RSTP, and Mstp configuration and management STP, RSTP, and Mstp configuration and managementEnabling STP, RSTP, or Mstp Disabling STP, RSTP, or Mstp Specifying the bridge priority Specifying the bridge forward delaySpecify the bridge forward delay Specifying the error disable timeout interval Enabling the error disable timeout timerEnable the error disable timeout timer Specifying the bridge maximum aging time Specifying the bridge hello time STP and Rstp Specifying the port-channel path costSpecifying the transmit hold count Rstp and Mstp Specify the port-channel path cost Disabling Cisco interoperability Mstp Enabling Cisco interoperability MstpMapping a Vlan to an Mstp instance Map a Vlan to an Mstp instance Enter the region command to assign a name to an Mstp region Specifying a revision number for an Mstp configurationSpecifying the maximum number of hops for a Bpdu Mstp Specifying a name for an Mstp region Clearing spanning tree-detected protocols Flushing MAC addresses Rstp and MstpClearing spanning tree counters Configuring the path cost Configuring STP, RSTP, or Mstp on CEE interface portsDisplaying STP, RSTP, and MSTP-related information Enabling automatic edge detection Enabling the guard root Enabling a port interface as an edge port Specifying restrictions for an Mstp instance Specifying the Mstp hello time Specifying the port priority Specifying a link typeEnabling port fast STP Enabling spanning tree Restricting the port from becoming a root portRestricting the topology change notification Disabling spanning tree Configuring STP, RSTP, or Mstp on CEE interface ports Link aggregation overview Configuring Link Aggregation using the CEE CLILink Aggregation Group configuration Converged Enhanced Ethernet Administrator’s Guide Data Center Core Dynamic link aggregation Link Aggregation Control ProtocolStatic link aggregation Brocade-proprietary aggregation Default Lacp configuration Lacp configuration guidelines and restrictionsLacp configuration and management Lacp configuration guidelines and restrictions Clearing Lacp counter statistics on a LAG Configuring the Lacp system priorityConfiguring the Lacp timeout period on a CEE interface Displaying Lacp information Lacp troubleshooting tipsClearing Lacp counter statistics on all LAG groups Deskew calculation failed for link link-name Lldp overview Configuring Lldp using the CEE CLI Layer 2 topology mapping Page Dcbx overview Dcbx overviewEnhanced Transmission Selection ETS Dcbx interaction with other vendor devices Lldp configuration guidelines and restrictionsPriority Flow Control PFC Dcbx interaction with other vendor devices Lldp configuration and management Default Lldp configurationDisabling and resetting Lldp globally Default Lldp configuration Specifying a user description for Lldp Configuring Lldp global command optionsSpecifying a system name for the Brocade FCoE hardware Advertising the optional Lldp TLVs Configuring the transmit frequency of Lldp framesConfiguring the hold time for receiving devices Configuring FCoE priority bits Configuring the advertisement of Lldp Dcbx -related TLVsAdvertise the Lldp DCBX-related TLVs using these commands Configure the FCoE priority bits Configuring Lldp profiles Clearing LLDP-related information Configuring Lldp interface-level command optionsApply an Lldp profile to the interface Clear Lldp statistics Display Lldp general information Displaying LLDP-related informationDisplay Lldp interface-related information Display Lldp neighbor-related information ACL overview Configuring ACLs using the CEE CLI ACL configuration guidelines and restrictions Default ACL configurationACL configuration and management Default ACL configuration VLANs Modifying MAC ACL rules Creating an extended MAC ACL and adding rules Reordering the sequence numbers in a MAC ACL Enter the no seq command to delete the existing ruleRemoving a MAC ACL Applying a MAC ACL to a Vlan interface Applying a MAC ACL to a CEE interface ACL configuration and management QoS overview Configuring QoS using the CEE CLI Rewriting Default user-priority mappings for untrusted interfacesQueueing User-priority mapping Incoming CoS User Priority Configuring the QoS trust mode Set the interface mode to ‘trust’ Configuring user-priority mappingsExit the configuration mode and return to Exec mode Set the interface mode to ‘3’ Creating a CoS-to-CoS mutation QoS map Traffic class mappingApplying a CoS-to-CoS mutation QoS map Queueing Multicast traffic Unicast traffic Activate the CoS-to-Traffic-Class mapping by name Mapping CoS-to-Traffic-ClassActivating a mapping CoS-to-Traffic-Class Tail drop Congestion controlVerifying a mapping CoS-to-Traffic-Class Congestion control Changing the Tail Drop threshold Enabling Ethernet Pause Ethernet pause Multicast rate limiting Enable an Ethernet PFC on the interfaceEthernet Priority Flow Control Enabling an Ethernet PFC Creating a receive queue multicast rate-limit SchedulingStrict priority scheduling Scheduling Deficit weighted round robin schedulingTraffic class scheduling policy Scheduling the QoS queue Scheduling Supported scheduling configurations Scheduling the QoS multicast queue Multicast queue scheduling Converged Enhanced Ethernet map configuration Defining a priority group table Creating a CEE mapCreate a CEE map. In this example, the name ‘test’ is used Define the CEE map for Pgid Define the map Defining a priority-table map Switchconfig-ceemap#exit Verify the CEE map provisioning for a specified name Applying a CEE provisioning map to an interfaceVerifying the CEE maps 802.1x protocol overview Configuring 802.1x Port Authentication802.1x configuration guidelines and restrictions Interface-specific administrative tasks for 802.1x authentication configuration tasksConfigure authentication Between the switch and CNA or NIC Configuring 802.1x on specific interface ports Configure the timeout interval Configuring 802.1x timeouts on specific interface portsEnable 802.1x authentication for the interface port Configure reauthentication for the interface port Disabling 802.1x on specific interface ports Interface-specific administrative tasks for Active Igmp snooping Configuring IgmpAbout Igmp Configuring Igmp Configuring IgmpConfigure a Vlan port member to be a multi-router interface Multicast routing Monitoring Igmp Configuring Igmp snooping querierConfiguring Igmp snooping querier Switch#show ip igmp groups Rmon configuration and management Configuring Rmon using the CEE CLIDefault Rmon configuration Configuring Rmon settings Configuring Rmon Ethernet group statistics collection Configuring Rmon events Switchconf-if-te-0/1#exit Rmon configuration and management FCoE configuration guidelines and restrictions FCoE configuration using the Fabric OS CLI Configuring Fcmap values for a Vlan Managing and displaying the FCoE configurationConfiguring FIP multicast advertisement intervals Managing and displaying the FCoE configuration Clearing logins Managing and displaying the FCoE login configurationDisplaying FCoE configuration-related information Enabling or disabling FCoE login configuration management Cleaning up login groups and VNport mappings Displaying or aborting the current configuration transaction Displaying the FCoE login configuration Creating and managing the FCoE login group configurationSaving the current FCoE configuration Creating an FCoE login group Perform the following task to delete an FCoE login group Modifying the FCoE login group device listDeleting an FCoE login group Perform the following task to rename an FCoE login group Renaming an FCoE login group Creating and managing the FCoE login group configuration CEE configuration management tasks CEE configuration managementCEE configuration management guidelines and restrictions Saving the running configuration file Display the running configuration fileLoading the startup configuration file Erasing the startup configuration file Archiving the startup configuration file Restore an archived running configuration fileRestore an archived startup configuration file Archive a startup configuration from Flash CEE configuration management commands Flash file management commandsFlash file management commands Lists the common CEE configuration management commands Switch#erase flash Debugging and logging commands Debugging and logging commands Index Symbols Numerics Dcbx FIP Lldp Radius Vlan