45
4Press to engrave the stamp stencil film, and then automatically cut off.
To affix a stamp:
5Remove the stamp frame from around the stamp film holder ink pad, one side at a
time, then remove the protective seal covering the ink pad and the backing paper
from the stamp stencil film.
6With the glossy side of the stamp stencil film upward, align one of its ends with the
slit on the side of the stamp film holder.
7Hold the end of the stamp stencil film in place with your thumb, then pass the tape
through the guides while pulling it tight.
1/1
COPIES
Alt
Caps
Undl/Frm
Length
Wide
Mirror
Tape end
Glossy side
Slit
Guides