TAPE MARGIN FUNCTION
The Tape margin function allows you to adjust the size of the margins on the left and right sides of your text.
The default tape margin setting is FULL; however, three other settings are also available.
FULL
(1” (25 mm margins))
NONE
(1/6” (4 mm margins)
NARROW
(1/3” (8 mm margins))
MEDIUM
(1/2” (12 mm margins))
☞After printing using the NONE, NARROW and MEDIUM tape margin settings, and the tape is automatically cut off, use scissors to cut along the cutting guide (:) to center the text within the label.
To change the tape margin setting:
Tape
1While holding down 
, press 
once, and keep 
held down to display the current tape margin setting.
Tape
2While still holding down 
, continue pressing 
until the desired tape margin set- ting is displayed.
3Release 
to apply the selected tape margin setting to the entire text.
59
