SIZE & WIDTH FUNCTIONS
The character size can be adjusted using both the Size and Width functions. Since the charac- ter size that can be used depends on the width of the tape, the following table shows the char- acter sizes that can be used with each tape width.
Tape widths | Sizes (in points) |
|
|
1/4” (6 mm) | 6, 9, 12 |
|
|
3/8” (9 mm) | 6, 9, 12, 18 |
|
|
1/2” (12 mm) | 6, 9, 12, 18, 24 |
|
|
3/4” (18 mm) | 6, 9, 12, 18, 24, 36 |
|
|
1” (24 mm) | 6, 9, 12, 18, 24, 36 |
|
|
The default size setting is AUTO and the default width setting is OFF. The currently selected size setting is always shown by the indicators above the display. All of the size indicators light up when the AUTO setting is selected. In addition, when the ON width setting is selected, the Wide indicator lights up.
With the AUTO size setting, the machine compares your text with the width of the installed tape and automatically adjusts the characters to the largest possible size. However, six other point sizes are also available and each can be printed in wide characters.
Size setting
(in points)
Width function OFF
Width function ON
6
9
12
18
47
