![](/images/new-backgrounds/1184886/184886121x1.webp)
FRAME FUNCTION
With the Frame function, you can choose from various frames and highlights to design a more decorative or emphasized label.
The following Frame settings are available:
OFF, SQUARE, ROUND, CANDY, POINTING, NAMEPLATE and DOT
The default frame setting is OFF; however, other settings are also available. When any setting other than OFF is selected, the Undl/Frm indicator on the right side of the display lights up.
☞If the ON underline setting has already been chosen when a frame or highlight is selected, the underline setting changes back to OFF and the text is framed or high- lighted.
Refer to Reference at the end of this section for samples of the available settings.
To change the frame setting:
Frame
1While holding down , press
once, and keep
held down to display the current frame setting.
Frame
2While still holding down , continue pressing
until the desired frame setting is displayed.
☞ The Undl/Frm indicator lights up when any setting other than OFF is selected.
3Release to apply the selected frame setting to the entire text.
EXAMPLE
To select the CANDY frame setting:
Frame
1While holding down , press
once, and keep held down.
F R A M E
O F F
2While still holding down , con-
| Frame |
|
tinue pressing | until CANDY is dis- | F R A M E |
played. |
| |
| C A N D Y | |
|
|
3Release .
Length
Undl/Frm
Wide
Length
Undl/Frm
Wide
57