Error Message

Cause

Remedy

 

 

 

COOLING

This message appears when the print

Wait until printing continues.

DOWN

head is used extensively (for exam-

 

 

ple, when printing multiple copies of

 

 

a large amount of text).

 

 

 

 

CUTTER

This message appears if the tape cut-

Turn the P-touch off, then on

ERROR!

ter is closed when you try to print or

again.

 

feed the tape.

 

 

 

 

DIVIDE BY

This message appears if a Euro con-

Set a conversion rate of more

ZERO ERROR

version rate of 0 is set.

than 0.

 

 

 

EEPROM

This message appears if a checksum

Contact your service representa-

ERROR!

error occurred when the P-touch was

tive.

 

turned on or if the keyword was dam-

 

 

aged and failed to initialize.

 

 

 

 

FORMAT BAD

This message appears if a letter

Enter a letter between A and D at

INPUT ABCD

between A and D has not been

the beginning and end of the bar

 

entered or a letter other than those

code data.

 

between A and D has been entered at

 

 

the beginning and end of the bar

 

 

code data when the CODABAR type

 

 

is selected.

 

 

 

 

INPUT

This message appears if the set

Input the correct number of dig-

WHOLE CODE

number of digits is not entered in the

its or change the number of dig-

 

bar code data.

its set in the bar code

 

 

parameters.

 

 

 

INTERFACE

This message appears if an error

• Press any key on the P-touch

ERROR!

occurs while data is being sent from

to clear the error message.

 

the computer to the P-touch.

• Make sure that the computer

 

 

is working correctly and that

 

 

the USB cable is properly

 

 

connected.

 

 

• Try printing again.

 

 

 

107