With the AUTO setting selected and 12-mm-, 18-mm- or 24-mm-wide tape installed, text consisting of just one line of only uppercase letters (and no accented characters) will be printed with a character size slightly larger than the maximum possible (29 points for 12-mm-wide tape, 48 points for 18-mm-wide tape, and 62 points for 24-mm- wide tape).

EXAMPLE

To select the 24 point size setting:

1 While holding down c, press 2 once,

and keep c held down.

Alt

S I Z E

 

Caps

A U T O

2 While still holding down c, continue pressing

 

 

2until 24 is displayed.

Alt

S I Z E

 

Caps

2 4

3Release c.

To change the width setting:

1Rotate + until 03/21 WIDTH (or 03/06 WIDTH for local formatting) is displayed, and then press + to display the current width setting.

2Rotate + until the desired width setting is displayed, and then press + to apply it to the text.

OR

1While holding down c, press 3 once, and keep c held down to display the current width setting.

2While still holding down c, continue pressing 3 until the desired width setting is dis- played.

3Release c to apply the selected width setting to the text.

☞The Width indicator comes on when a setting other than MEDIUM is selected.

78