Brother 2450DX TAPE MARGIN FUNCTION

REFERENCE

TAPE MARGIN FUNCTION

The Tape margin function allows you to adjust the size of the margins on the left and right sides of your text.

The default tape margin setting is FULL; however, three other settings are also available.

FULL (24 mm margins)	NARROW (8 mm margins)
NONE (4 mm margins)	HALF (12 mm margins)

☞When a setting other than FULL is selected, extra tape is fed out before printing starts. The extra tape is cut off if the Auto cut function is set to ON, so that the left and right margins are equal.

To change the tape margin setting:

1Rotate + until 10/21 TAPE is displayed, and then press + to display the current tape margin setting.

2Rotate + until the desired tape margin setting is displayed, and then press + to apply it to the entire text.