Tape widths | Maximum number of lines that can be printed |
|
|
6 mm | 2 |
|
|
9 mm | 2 |
|
|
12 mm | 3 |
|
|
18 mm | 5 |
|
|
24 mm | 7 |
|
|
The return key can also be used to select an item from a list (e.g., add a symbol or accented character to the text) or to apply a selected setting.
Some questions asking you to confirm a command may appear on the LCD display, especially when the function that you have chosen will delete or affect files. In these cases, pressing r is like answering “yes”.
☞To answer “no”, press *. Refer to DELETE KEY on page 58.
To add a new line:
●Press r. The return mark ( 
) appears to indicate the end of the line.
To select an item from a list:
●Press r.
To answer “yes”:
●Press r.
NEW BLOCK FUNCTION
Whenever the number of lines in a section of the text changes, a new block must be created.
☞A single label can only contain a maximum of five blocks. If five text blocks already exist when c is held down and r is pressed, the error message “5 BLOCK
LIMIT!” appears.
If the cursor is positioned in the middle of a text block when c is held down and r is pressed, the block splits into two and the character to the right of the cursor’s current position becomes the beginning of a new block.
To add a new block:
●Hold down c and press r once. The new block mark ( 
) appears in the text to indicate the end of the block.
55