Error Message

Cause

Remedy

 

 

 

LENGTH

• This message appears if the text is

• Shorten the text to less than 1

LIMIT!

longer than 1 metre when you try to

metre before trying to print.

 

print.

 

 

• This message appears if the Length

• Set the label length between

 

function is used to set a label

4.0 cm and 30.0 cm.

 

length that is less than 4.0 cm or

 

 

more than 30.0 cm.

 

 

• This message appears if the Tab

• Set the tab length so that it is

 

Length function is used to set a tab

less than 30.0 cm.

 

length that is more than 30.0 cm.

 

 

 

 

LINE

This message appears if the number

Reduce the number of lines or

LIMIT!

of lines in the text is greater than the

install a tape of greater width.

 

maximum number of lines possible

 

 

for the installed tape.

 

 

 

 

MEMORY

This message appears if you try to

Delete an unwanted file to make

FULL!

store a text file after 2500 characters

room for the new one.

 

have already been stored in the

 

 

memory.

 

 

 

 

NO

This message appears if you try to

Store a text file first.

FILES!

recall or delete a text file from the

 

 

memory when none are stored.

 

 

 

 

OVERFLOW

This message appears if the calcu-

Enter a smaller value.

 

lated Euro conversion result exceeds

 

 

10 digits.

 

 

 

 

REPLACE

This message appears if the installed

Replace the batteries or use the

BATTERIES!

alkaline batteries are about to run

AC adapter.

 

out.

 

 

 

 

ROM

This message appears if there is a

Turn off the machine, and then

PROBLEM!

problem with the machine’s read

while holding down c and

 

only memory.

 

R, turn the machine back on.

 

 

 

 

Contact your service representa-

 

 

tive.

 

 

 

SET 24mm!

This message appears if a 24-mm-wide

Install a 24-mm-wide tape cas-

 

tape cassette is not installed when an

sette.

 

Auto Format layout for a 24-mm-wide

 

 

tape is selected.

 

 

 

 

108