LENGTH FUNCTION
Although the length of the printed label automatically adjusts to fit the length of the entered text, there may be times when you will want to make a label with a specific length. The Length function allows you to set the label length between 4.0 cm and 30.0 cm.
The default length setting is OFF. When the Length function is set to ON, the Length indicator on the right side of the display comes on.
To change the length setting:
1Rotate + until 12/21 LENGTH is displayed, and then press + (OR while holding down c, press T once, and keep c held down) to display the current length
of the label (the text and both margins) briefly, then display the current label length setting (ON or OFF).
2Rotate + (OR while still holding down c, continue pressing T) until the desired label length setting is displayed.
☞The Length indicator comes on when ON is selected.
3Press + (OR release c). If ON was selected, the current label length setting is dis- played.
4Rotate + (OR press h or e) until the desired length is displayed, or use the number keys to type in the length.
☞To change the length in
5Press + (OR press r).
EXAMPLE
To select a label length of 12 cm:
1While holding down c, press T once, and keep c held down.
Alt
Caps
L E N G T H 8 . 3 c m
Alt
Caps
L E N G T H O F F
88