8The “Choose Product Components” dialog box appears.

Select the installation method.

•For a typical installation

Click “Next” to immediately start installing all options.

☞About 20 MB of available hard-disk space is needed to begin installation. In order to install all options, about 100 MB of available hard-disk space is needed.

•For a minimal installation

Select “Minimal” from the Feature Set list, and then click “Next” to start installing just the P-touch Editor 3.2 application.

☞If certain options (such as the Auto For- mat Templates and the Clip Art) are not installed, some P-touch Editor func- tions may not be available.

•For a custom installation

Select “Custom” from the Feature Set list to display the list of options that can be selected for installation.

Only the options with a check mark beside them will be installed. Select the options that you wish to install, and then click “Next”.

9The “Choose Alias Folder” dialog box appears, allowing you to select where an alias to P-touch Editor 3.2 will be added.

Select the desired location for the alias, and then click “Next”.

24