On a Macintosh Computer

The Mac version of the software is for a Macintosh with an English operating system. If the software is installed on a Macintosh with an operating system in a different language, the software may not run properly.

BEFORE INSTALLATION

Check that your system configuration meets the following requirements. Computer: Macintosh with Power PC processor

Operating system: Mac OS 8.6 to 9.X or OS X 10.1 to 10.2.4

Hard disk free space: At least 20 MB (100 MB for a full installation)

☞Up to 100 MB of hard disk free space may be needed when printing long labels or large amounts of data.

Memory: At least 32 MB

USB port (installed as standard equipment)

CD-ROM drive

INSTALLING THE P-TOUCH EDITOR 3.2 SOFTWARE

The P-touch Editor 3.2 software includes a variety of more complex functions for printing bar codes and images, enabling you to design just about any label you can imagine. Install the P-touch Editor 3.2 software onto a Macintosh as described below.

With Mac OS 8.6 to 9.X:

1With the P-touch and the Macintosh turned off, connect the P-touch to the computer using the enclosed USB interface cable as described on page 6. Be sure to leave the

P-touch turned off.

2Turn on the Macintosh.

3Insert the enclosed CD-ROM into the computer’s CD-ROM drive.

4 Double-click the Mac OS 9 folder to open it.

5Double-click the P-touch Editor 3.2 folder to open it.

21