5Double-click the P-touch Quick Editor Installer icon in the folder that appears. The installer starts up.

6Select the installation method.

•For a basic installation

Clicking “Install” immediately starts installing the most basic options.

☞About 20 MB of available hard-disk space is needed to begin installation. If enough hard-disk space is available, click “Install”.

•For a custom installation

Clicking “Custom Install” displays a dialog box that allows you to select which options to install.

Only the options with a check mark beside them will be installed. Select the options that you wish to install, and then click “Install”.

☞In order to print from the P-touch 2450DX, “PT-2450DX Driver” must be selected for installation.

7When the dialog box appears, indicating that the installation is finished, click “Quit”.

8When the dialog box appears, asking if you wish to restart the computer, click “Restart” to restart the computer.

With Mac OS X 10.1 to 10.2.4:

1With the P-touch and the Macintosh turned off, connect the P-touch to the computer using the enclosed USB interface cable as described on page 6. Be sure to leave the

P-touch turned off.

2Turn on the Macintosh.

3Insert the enclosed CD-ROM into the computer’s CD-ROM drive.

26