10 - 1 IMPORTANT INFORMATION
10
Standard telephone and FCC Notices
These notices are in effect o n models sold and
used in the United States only.
When programming emergency numbers or making test calls to
emergency numbers:
■Remain on the line and brief ly explain to the dispatcher the
reason for the call before hanging up.
■Perform these activities in the off-peak hours, such as early
morning or late evening.
This equipment complie s with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the backside of this
equipment is a label that contains, among other informati on, a
product identifier in the format US: AAAEQ##TXXXX. If requested,
this number must be provided to the telephone company.
You may safely connect this equipment to the telephone line by
means of a standard modular jack, USOC RJ11C.
A plug and jack used to conne ct this equipment to the premises
wiring and telephone network must comply with the applicable FCC
Part 68 rules and requireme nts adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this product. It is
designed to be connected to a compatible modular jack that is also
compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on a telephone line
may result in the devices not ringing in response to an incoming call.
In most but not all areas, the sum of RENs should not exceed fiv e
(5.0). To be certain of the number of device s that may be connected
to a line, as determined by the total RENs, contact the local
telephone company. Fo r products approved after Jul y 23, 2001, the
REN for this product is part of the product identifier that has the
format US:AAAEQ##TXXXX .The digits represented by ## are the
REN without a decimal point (e.g., 06 is a REN of 0.6). For earlier
products, the REN is separ ately shown on the label.
Important information