nCut the thread with scissors, slide the bobbin winder shaft to the left, and then remove the bobbin from the shaft.
Memo
zIf the bobbin winder shaft is set to the right side, the needle will not move. (Embroidering is impossible.)
zWhen the machine is started or the handwheel is turned after winding the bobbin, the machine will make a clicking sound; this is not a malfunction.
■When the thread became tangled under the bobbin winder seat.
If the bobbin winding starts when the thread is not passed under the pretension disk of the bobbin- winding thread guide correctly, the thread may
become tangled under the bobbin winder seat.1 In such a case, wind off the thread according to the following procedure.
b
a
aThread
bBobbin winder seat
CAUTION
●Do not remove the bobbin winder seat even if the thread become tangled under the bobbin winder seat. It may result in injuries.
●Do not remove the screw of the bobbin winder presser, otherwise the machine may be damaged; you cannot wind off the thread by removing the screw.
a
aScrew of the bobbin winder presser
aIf the thread become tangled under the bobbin
winder seat, press (Start/stop button) once to stop the bobbin winding.
a
aStart/stop button
Winding/Installing the Bobbin 33