Brother 885-V55, Computerized Embroidery Machine Removing the embroidery frame

GETTING READY ————————————————————————————————————————————

Removing the embroidery frame

Make sure that the machine is completely stopped and follow the instructions below.

aRaise the presser foot lever.

a

aPresser foot lever

bPress (Needle position button) once or twice to raise the needle.

a

aNeedle position button

cPress the part of the embroidery frame holder to the left side as shown in the figure below, and raise the embroidery frame.

dPass the embroidery frame under the presser foot while raising the presser foot lever even further.

eRemove the embroidery frame.

CAUTION

●Do not touch the start/stop button or needle position button. If one of the buttons is accidentally pressed, the machine will move and your finger may be pricked with the needle or the needle may break.

aPress here to remove.

XThe embroidery frame will separate from the embroidery frame holder.

48