Embroidering
After the preparations are done, you can try embroidering. This section describes the steps for embroidering and appliquéing.
Note
zBefore embroidering, check that there is enough thread in the bobbin. If you continue embroidering without enough thread in the bobbin, the thread may tangle.
zWhen embroidering on large garments (especially jackets or other heavy fabrics), do not let the fabric
hang over the table. Otherwise, the embroidery unit cannot move freely, and the pattern may not turn
out as planned. | 2 |
| |
|
|
Checking the pattern before embroidering
The embroidery frame is moved to indicate the embroidering position. Closely watch the frame to check that the pattern will be sewn at the correct place.
aAfter selecting. the embroidery pattern, press
XThe embroidery screen is displayed.
bPress 
.
XThe layout screen is displayed.
cPress 
.
XThe frame moves to indicate the entire embroidering area.
CAUTION
●Make sure the needle is up when the embroidery frame is moving. If the needle is down, it could break and result in injury.
Embroidering 57