dLower the presser foot lever.
a
aPresser foot lever
ePress 
(Start/stop button).
a
aStart/stop button
Note
zDo not leave objects in the range of motion of the embroidery frame. The frame may strike the object and cause a poor finish to the embroidery pattern.
CAUTION
●Use the embroidery frame that matches the size of the pattern being embroidered. Otherwise, the embroidery frame may be hit by the embroidery foot and cause injury or needle breakage.
fAfter progressing 
(Start/stop button) to stop the machine.
gUse scissors to cut the thread at the beginning of the stitching.
Cut the thread at the edge of the stitching.
2
Note
zIf the thread is left at the beginning of the stitching, it may be sewn over as you continue embroidering the pattern, making it very difficult to deal with the thread after the pattern is finished. Trim the thread at the beginning.
hPress 
(Start/stop button) again.
XThe embroidery starts again and stops automatically with reinforcement after one color has been completed. When programmed thread cutting is set, the thread is cut automatically after reinforcement. In this case, go to step j .
iPress 
(Thread cutter button) once.
a
aThread cutter button
XThe needle is raised and the threads are cut.
jRaise the presser foot lever.
a
aPresser foot lever
Memo
zIf the embroidery foot is not raised, the upper thread cannot be replaced.
Embroidering 59