EMBROIDERY
DISPLAY UNIT
The measurement units that are displayed can be selected. [mm/inch]
■LCD button
Example: Selecting alphanumeric characters
When a specific pattern is selected, press this key and then, press 
to switch the display. The
settings such as the specified alphanumeric character string and color are confirmed.
Press this key to change the thread settings.
Press this key to select or cancel programmed thread cutting. When programmed thread cutting is set, the thread is cut automatically after reinforcement.
Press 
or 
to change the thread density (characters and frame patterns only).
Press this key to adjust the pattern.
Press this key when you want to change the color, character by character in character embroidery. Since the machine stops at the end of each character, the upper thread is changed as you embroider. Press this key again to cancel
The needle progresses one color or one stitch (if pressed continuously, 9 stitches to 30 stitches) at a time and changes the position for starting the embroidery. This is used when a specific color is not embroidered or when restarting the machine after power has been turned off in the middle of the operation.
52