Size key
Increases/decreases the size of
the pattern. Press | to return |
to the previous screen. |
|
Rotates the pattern 90 degrees to the left
Rotates the pattern 90 degrees to the right
Rotates the pattern 10 degrees to the left
Rotates the pattern 10 degrees to the right
Decreases size
Returns to original size. When the pattern was moved with the change position keys, it returns to its original position.
Increases size
Change position keys
Moves the embroidery position up, down, left and right.
Memo
zIf you change the size of the pattern or reverse it, the embroidery which have been moved will return to its initial position. Use the Change position keys after you have changed the size of the pattern or reversed it.
zThe embroidery patterns you have edited or adjusted can be saved in the machine’s memory. For details, refer to "Saving patterns" (page 75).
Layout key
Press this key to move to rotation screen.
Rotation key
Rotates the pattern 1 degree, 10 degrees or 90 degrees at a time.
Press 
(Back key) to return to the previous screen.
Rotates the pattern 1 degree to the left
Rotates the pattern 1degree to the right
Returns the pattern to its original position
Memo
zWhen the pattern is larger than 10cm (4 inches) x 10cm (4 inches), there may be a case that the pattern cannot be rotated.
Horizontal mirror image key
Mirrors the pattern left and right.
Memo
zMirroring patterns is possible only for a embroidery pattern or a frame pattern.
Starting point stitching key
Switches the stitching starting point between center and lower left of the design.
•Press | (Back key) to return to the |
previous screen.
Trial key
Moves the frame to check the pattern position.
2
Editing and Saving Patterns 63