eWhile pressing in the lever with your finger, fit the embroidery foot bar over the needle clamp screw to attach the embroidery foot to the presser foot bar.
c
b
a
aPresser foot bar
bNeedle clamp screw c Embroidery foot bar
fSecure the embroidery foot with the presser foot holder screw.
Set the embroidery foot perpendicular.
a
aPresser foot holder screw
gFirmly tighten the presser foot holder screw. Turn the screwdriver toward the front.
CAUTION
●Do not hit the needle with your finger or the embroidery foot when attaching it. The needle may break or cause injury.
●Be sure to tighten the screw with the included screwdriver. If the screw is loose, the needle may hit the embroidery foot and break or bend.
●Before embroidering, always turn the handwheel toward you (counterclockwise) slowly to make sure that the needle does not hit the embroidery foot. The needle may break or bend.
3
a
aScrewdriver
Attaching the Embroidery Foot 81