Load your document.
Enter the number of copies you want.

You can change the copy settings temporarily for the next copy.

The machine returns to its default settings after 1 minute.

If you have finished choosing settings, press Mono Start or Colour Start.

If you want to choose more settings, press a or b.

Note

You can save some of the settings that you use most often by setting them as default. These settings will stay until you change them again. (See Setting your changes as a new default on page 34.)

Making copies

Changing copy speed and quality

You can choose the copy quality. The factory setting is Normal.

Fast

Fast copy speed and lowest

 

 

amount of ink used. Use this

 

 

setting to save time (documents to

 

 

be proof read, large documents or

 

 

many copies).

4

 

Even if you set this option the copy

 

speed will be slower with

 

 

Ink Save Mode, Book Copy or

 

 

Watermark Copy turned on.

 

Normal

Recommended setting for ordinary

 

 

print outs. Good copy quality with

 

 

adequate copy speed.

 

 

 

 

Best

Use this setting to copy precise

 

 

images such as photographs. The

 

 

highest resolution and slowest

 

 

speed.

 

 

 

 

a b

c Press a or b to choose Quality.

d Press d or c to choose Fast, Normal or Best.

Press OK.

e If you do not want to change additional settings, press Mono Start or Colour Start.

27