Chapter 4
Setting your changes as a new default
You can save the copy settings for Quality, Enlarge/Reduce, Brightness, Contrast, Ink Save Mode and
Page Layout that you use most often by setting them as the default settings. These settings will stay until you change them again.
a Press a or b to choose your new setting. Press OK.
Repeat this step for each setting you want to change.
b After changing the last setting, press
aor b to choose Set New Default. Press OK.
Press + to choose Yes.
Press Stop/Exit.
Restoring all settings to the factory settings
You can restore all the settings you have changed back to the factory settings. These settings will stay until you change them again.
a Press a or b to choose Factory Reset. Press OK.
b c
Press + to choose Yes.
Press Stop/Exit.
34