Printing photos from a memory card or USB Flash memory drive
Before you can print an individual image, you have to know the image number.
a Make sure you have put the memory card or USB Flash memory drive in the correct slot.
Press 
(Photo Capture).
b c
d Press a repeatedly to choose the image number that you want to print from the Index page (Thumbnails).
If you want to choose a two digit number, press c to move the cursor to the next digit.
(For example, enter 1, c, 6 to print image No.16.)
Press OK.
Note
Press b to decrease the image number.
e Repeat step d until you have entered all the image numbers that you want to print.
(For example, enter 1, OK, 3, OK, 6, OK to print images No.1, No.3 and No.6.)
Note
You can enter up to 12 characters (including commas) for the image numbers you want to print.
f After you have chosen all the image numbers, press OK again.
g Press + or - repeatedly to enter the number of copies you want.
h Do one of the following:
Change the print settings. (See page 47.)
If you do not want to change any settings, press Colour Start to print.
Enhance PhotosYou can edit and add effects to your photos and view them on the LCD before printing.
Note
• After adding each effect, you can enlarge | 5 |
the view of the image by pressing Ink Management. To go back to the original size, press Ink Management again.
•The Enhance Photos feature is supported by technology from Reallusion, Inc.
Auto CorrectAuto Correct is available for most photos. The machine decides the suitable effect for your photo.
a Make sure you have put the memory card or USB Flash memory drive in the correct slot.
Press 
(Photo Capture).
b Press a or b to choose Enhance Photos. Press OK.
c Press d or c to choose your photo. Press OK.
d Press a or b to choose Auto Correct. Press OK.
Note
If Remove
41