Press d or c to choose On.
Press d or c to choose On.
Enter the number of copies you want.
Press a or b to choose Watermark Copy. Press OK.
Load your document.
Enter the number of copies you want.
Using media cards or a USB Flash memory drive data

a b

c Press a or b to choose Watermark Copy. Press OK.

d

e Press a or b to choose Current Setting. Press OK.

f Press a or b to choose Media. Insert a media card or USB Flash memory drive.

g Press OK and press d or c to choose the data you want to use for the watermark.

Note

You can use your own image of up to 1280 ⋅ 1280 pixels as a watermark.

h Press OK and change any additional settings from the options shown on the LCD.

i If you do not want to change additional settings, press Mono Start or Colour Start.

IMPORTANT

DO NOT take out the memory card or USB Flash memory drive while Photo Capture is blinking to avoid damaging the card, USB Flash memory drive or data stored on them.

Making copies

Using a scanned paper document as your watermark

a b

c

d Press a or b to choose4 Current Setting.

Press OK.

e Press a or b to choose Scan. Press OK and set the page that you want to use as a watermark on the scanner glass.

f Press Mono Start or Colour Start.

g Take out the watermark document you scanned and load the document you want to copy.

h Press d or c to change the Transparency of the watermark. Press OK.

i If you do not want to change any additional settings, press Mono Start or Colour Start.

Note

You cannot enlarge or reduce the scanned watermark.

33