Chapter 4

Enlarging or reducing the image copied

You can choose an enlargement or reduction ratio. If you choose Fit to Page, your machine will adjust the size automatically to the paper size you set.

a Load your document.

b Enter the number of copies you want.

c Press a or b to choose Enlarge/Reduce.

d Press d or c to choose 100%, Enlarge, Reduce, Fit to Page, Custom(25-400%).

e Do one of the following:

„If you choose Enlarge or Reduce press OK and press d or c to choose the enlargement or reduction ratio you want. Press OK and go to step f.

„If you choose Custom(25-400%), press OK. Press + or - to enter an enlargement or reduction ratio from 25% to 400%. Press OK and go to step f.

„If you choose 100% or

Fit to Page, press OK. Go to step f.

198% 10x15cmiA4

186% 10x15cmiLTR

142% A5iA4

100%

97% LTRiA4

93% A4iLTR

83%

69% A4iA5

47% A4i10x15cm

Fit to Page

Custom(25-400%)

28

f If you do not want to change additional settings, press Mono Start or Colour Start.

Note

•Page Layout is not available with

Enlarge/Reduce.

•Page Layout, Book Copy and

Watermark Copy are not available with

Fit to Page.

•Fit to Page does not work properly if the document on the scanner glass is skewed by more than 3 degrees. Using the document guidelines on the left and top, place your document in the upper left hand corner, with the document face down on the scanner glass.

•Fit to Page is not available for a Legal size document.