„ Press OK and change the print settings. (See page 47.)
„ If you do not want to change any settings, press Colour Start to print.
43
Do one of the following:
Press d or c to choose your photo. Press OK.
c Press d or c to choose your photo. Press OK.
d Press a or b to choose Monochrome. Press OK.
e Press OK. Then press + or - repeatedly to enter the number of copies you want.
f
Press a or b to choose Enhance Photos. Press OK.
b

Printing photos from a memory card or USB Flash memory drive

Remove Red-Eye

The machine detects eyes in your photos and will attempt to remove red-eye from your photo.

Note

There are some cases when red-eye may not be removed.

•When the face is too small in the image.

•When the face is turning too far up, down, left or right.

a Make sure you have put the memory card or USB Flash memory drive in the correct slot.

Press (Photo Capture).

f Do one of the following:

„Press OK and change the print settings. (See page 47.)

„If you do not want to change any settings, press Colour Start to print.

Monochrome

You can convert your photo to monochrome.

a Make sure you have put the memory card or USB Flash memory drive in the correct slot.

Press

(Photo Capture).

5

b Press a or b to choose Enhance Photos. Press OK.

c

d Press a or b to choose Remove Red-Eye. Press OK.

„When Remove Red-Eye is successful, the photo with the effect is shown. The adjusted part is shown in a red frame. Press OK.

„When Remove Red-Eye is unsuccessful,

Unable to Detect. is shown.

Press OK to go back to the previous level.

Note

Press a to try Remove Red-Eyeagain.

e Press + or - repeatedly to enter the number of copies you want.