Brother DCP-8070D Volume settings, Ecology features, Beeper volume, Toner Save, Sleep Time

Chapter 3

Volume settings

Beeper volume

When the beeper is on, the machine will beep when you press a key or make a mistake. You can choose a range of volume levels, from

High to Off.

a Press Menu, 1, 2.

b Press a or b to choose Off, Low, Med or

High. Press OK.

c Press Stop/Exit.

22

Ecology features

Toner Save

You can save toner using this feature. When you set Toner Save to On, prints appear lighter. The default setting is Off.

a Press Menu, 1, 3, 1.

b Press a or b to choose On or Off. Press OK.

c Press Stop/Exit.

Note

We do not recommend Toner Save for printing Photo or Greyscale images.

Sleep Time

The Sleep Time setting can reduce power consumption by turning off the fuser while the machine is idle.

You can choose how long the machine must be idle before it goes into sleep mode. When the machine receives computer data or makes a copy, the timer will be reset. The default setting is 005 minutes.

While the machine is in sleep mode the LCD will display Sleep. When printing or copying in sleep mode, there will be a short delay while the fuser warms up.

a Press Menu, 1, 3, 2.

b Enter the length of time the machine is idle before entering sleep mode. Press OK.

c Press Stop/Exit.

Note

To turn off sleep mode, press Secure and Job Cancel at the same time in step b. Press a or b to choose Off. Press OK.