Put the interface access cover and the SO-DIMM cover back on.

d Unpack the SO-DIMM and hold it by its edges.

IMPORTANT

To prevent damage to the machine from static electricity, DO NOT touch the memory chips or the board surface.

e Hold the SO-DIMM by the edges and align the notches in the SO-DIMM with the protrusions in the slot. Insert the SO- DIMM diagonally (1), then tilt it toward the interface board until it clicks into place (2).

12

f

g Plug the machine’s power cord back into

the electrical socket first, and then connect the interface cable.

h Turn on the machine’s power switch.

Note

To make sure that you have installed the SO-DIMM properly, you can print the user settings page that shows the current memory size. (See User Settings List on page 23)

54