Error Message | Cause | Action |
Out of Memory | The machine’s memory is full. | Copy operation in progress |
|
| Do one of the following: |
|
| Press Start to copy the scanned pages. |
|
| Press Stop/Exit and wait until the other |
|
| operations in progress finish, and then |
|
| try again. |
|
| Clear the data from the memory. (See |
|
| |
|
| Print operation in process |
|
| Reduce print resolution. (See Advanced tab |
|
| in the Software User’s Guide on the CD- |
|
| ROM.) |
|
|
|
Output Tray Full | The ADF output tray has reached | Remove the scanned pages from the ADF |
| its maximum capacity | output tray. If you want to scan the remaining |
|
| pages of your documents press Start. |
|
|
|
Print Unable XX | The machine has a mechanical | Disconnect the machine from the power for |
| problem. | several minutes, then reconnect it. |
|
|
|
Protected Device | The protect switch of the USB | Turn off the protect switch of the USB Flash |
| Flash memory drive is on. | memory drive. |
|
|
|
Rename the File | There is already a file on the USB | Change the file name of the file on the USB |
| Flash memory drive with the | Flash memory drive or the file you are trying |
| same name as the file you are | to save. |
| trying to save. |
|
|
|
|
Replace Drum | The drum unit is the end of its life. | Replace the drum unit with a new one. |
|
| |
|
|
|
| The drum unit counter was not | 1 Open the front cover, and then press |
| reset when a new drum was | Clear/Back. |
| installed. | 2 Press 1 to reset. |
|
| |
|
|
|
Replace Fuser | It is time to replace the fuser unit. | Call your Brother dealer to replace the fuser |
|
| unit. |
|
|
|
Replace Laser | It is time to replace the laser unit. | Call your Brother dealer to replace the laser |
|
| unit. |
|
|
|
Replace PF Kit1 | It is time to replace the paper | Call your Brother dealer to replace the |
| feeding kit for Tray 1. | PF Kit 1. |
|
|
|
Replace PF KitMP | It is time to replace the paper | Call your Brother dealer to replace the |
| feeding kit for the MP tray. | PF Kit MP. |
|
|
|
Replace Toner | The toner cartridge is at the end | Replace the toner cartridge with a new one. |
| of its life and printing is not | |
| possible. | on page 85.) |
|
|
|
Scan Unable XX | The machine has a mechanical | Disconnect the machine from the power for |
| problem. | several minutes, then reconnect it. |
|
|
|
68