Reset
You can reset all the machine settings back to the settings that were set at the factory.
Brother strongly recommends you perform this operation when you dispose of the machine.
Note
Unplug the interface cable before you reset.
a Press Menu, 1, 7, 1.
b Press 1 or 2 to choose 1.Reset or 2.Exit.
c If you choose 1.Reset in step b, you will be asked to reboot the machine. Press 1 or 2 to choose 1.Yes or 2.No. If you choose 1.Yes, the machine will begin the Reset.
Troubleshooting and routine maintenance
Packing and shipping the machine
CAUTION
Make sure that the machine has fully cooled down by leaving it disconnected from the power for at least 30 minutes before packing.
When you transport the machine, use the packing materials that came with your machine. If you do not pack the machine correctly, you could void your warranty.
a
b Unplug all the cables and AC power cord from the machine.
c Press the front cover release button and open the front cover.
d Take out the drum unit and toner | C |
cartridge assembly. Leave the toner |
|
cartridge installed in the drum unit. |
|
e Put the drum unit and toner cartridge assembly into a plastic bag and seal the bag.
f Close the front cover.
91