Press Menu.

Cleaning and checking the machine

Cleaning the scanner glass

a Unplug the machine from the AC power outlet.

b Lift the document cover (1). Clean the scanner glass (2) and the white plastic (3) with a soft lint-free cloth moistened with a non-flammable glass cleaner.

1

3

2

Note

In addition to cleaning the scanner glass with a non-flammable glass cleaner, run your finger tip over the glass to see if you can feel anything on it. If you feel dirt or debris, clean the glass again concentrating on that area. You may need to repeat the cleaning process three or four times. To test, make a copy after each cleaning attempt.

Routine maintenance

Cleaning the print head

To maintain good print quality, the machine will automatically clean the print head when needed. You can start the cleaning process manually if there is a print quality problem.

Clean the print head if you get a horizontal line in the text or graphics, or blank text on your printed pages. You can clean Black only, three colors at a time (Yellow/Cyan/Magenta), or all four colors at once.

Cleaning the print head consumes ink. Cleaning too often uses ink unnecessarily.

Important

DO NOT touch the print head. Touching

 

the print head may cause permanent

A

damage and may void the print head's

warranty.

 

a

b Press a or b to choose 1.Ink. Press OK.

c Press a or b to choose 2.Cleaning. Press OK.

d Press a or b to choose Black, Color or All.

Press OK.

The machine cleans the print head. When cleaning is finished, the machine will go back to Ready mode automatically.

Note

If you clean the print head at least five times and the print has not improved, try installing a new Genuine Brother Brand replacement ink cartridge for each problem color. Try cleaning the print head again up to five more times. If the print has not improved call Brother Customer Service. (See Brother numbers

uupage i.)

29