Brother DCP-J140W Network menu

Menu and features

Network menu

Level1	Level2	Level3	Options	Descriptions	Page
3.Network	1.TCP/IP	1.BOOT Method	Auto*	Chooses the BOOT	See .
			Static	method that best suits
				your needs.
			RARP
			BOOTP
			DHCP
		2.IP Address	[000-255].	Enter the IP address.
			[000-255].
			[000-255].
			[000-255]
		3.Subnet Mask	[000-255].	Enter the Subnet mask.
			[000-255].
			[000-255].
			[000-255]
		4.Gateway	[000-255].	Enter the Gateway
			[000-255].	address.
			[000-255].
			[000-255]
		5.Node Name	BRWXXXXXXXXXXXX	Lets you check the Node		C
				name.
		6.WINS Config	Auto*	Chooses the WINS
			Static	configuration mode.
		7.WINS Server	(Primary)	Specifies the IP address
			000.000.000.000	of the primary or
			(Secondary)	secondary WINS server.
			000.000.000.000
		8.DNS Server	(Primary)	Specifies the IP address
			000.000.000.000	of the primary or
			(Secondary)	secondary DNS server.
			000.000.000.000
		9.APIPA	On*	Automatically allocates
			Off	the IP address from the
				link-local address range.
	2.Setup Wizard	—	—	You can manually
				configure your print
				server for a wireless
				network.
	See Network User’s Guide.
	The factory settings are shown in Bold with an asterisk.

49