Reinstall the new drum unit, keeping the front cover open.
Follow these steps to replace the drum unit:
1 Open the front cover.
2 Remove the old drum unit. Place the drum unit on a drop cloth or disposable paper to avoid scattering toner.
3 Hold down the lock lever on the right and pull the toner cartridge out of the drum unit assembly. (See Replacing the Toner Cartridge, page 14-16.)

Lock

Lever

Discard the used drum unit according to local regulations. If you are not sure of them, call your local Sanitation Department. Be sure to seal the drum unit tightly so toner powder does not spill out of the unit. When discarding used drum units, keep them separate from domestic garbage.

4Wait to unpack the new drum unit until immediately before installing it. Place the old drum unit into the aluminium bag and discard it according to local regulations.

5Reinstall the toner cartridge into the new drum unit. (See Replacing the Toner Cartridge, page 14-16.)

6

7Press Clear Settings.

8Press 1 and when the LCD shows ACCEPTED, and close the front cover.

Caution

REPLACE DRUM? 1.YES 2.NO

If toner scatters and your hands or clothes get dirty, immediately wipe it off or wash it with cold water.

T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E 14 - 20